带盖玻璃杯 - 美国大都会艺术博物馆展品查阅

品名（中）	带盖玻璃杯
品名（英）	Glass pyxis with lid
入馆年号	1917年，17.194.238a, b
策展部门	希腊和罗马艺术（Greek and Roman Art）
创作者
创作年份	公元 1 - 公元 50
创作地区
分类	玻璃（Glass）
尺寸	高: 3 1/16 英寸 (7.8 厘米) Diameter (.a): 2 7/16 英寸 × 1 15/16 英寸 × 1 5/16 英寸 (6.1 × 5 × 3.4 厘米) 高 (.a): 2 1/2 英寸 (6.3 厘米) 高 (.b): 15/16 英寸 (2.4 厘米) Diameter: 2 3/16 × 2 3/8 英寸 (5.6 × 6.1 厘米)
介绍（中）	不透明的白色长方体：具有向内倾斜边缘的垂直边缘；微凸圆柱形颈部；八边形侧面，上面和下面有明显的饰条（前者的上边缘充当盖子所在的突出部分）；底部下弯，底部略凹盖子：不均匀的垂直边缘；上面是普通的圆柱形衣领，向外弯曲成型；斜肩；平顶在盒子上，八块面板围绕着侧面，装饰着四种重复的设计：1，三角形山墙下的辐条圆圈；2，圆形拱形下方的掌叶；3，菱形内有中心点的圆圈；和4，在圆形拱形下方的茎上的莲花；由垂直凸起线分隔的面板，上面和下面的饰条上装饰有凸起的旋钮，可能代表晶闸管；在基部的下弧线上，由重叠的叶子组成的圆形雕带；在底部，四个同心凸起的圆圈，中心有一个点。盖子上，肩膀上有八个向外的手掌；顶部有三个同心凸起的圆圈，中心有一个圆点盒子完好无损，但盖子坏了，边缘有一个缺口，衣领上方的模具周围有其他小孔；盒子和盖子大部分都覆盖着乳白色的风化和彩虹色盒子模具包括四个用于侧面的垂直面板和一个用于盒子底部的碟形部分；盖模包括顶部段和三个侧部段。
介绍（英）	Opaque white. Box: vertical rim with inward sloping edge; slightly convex cylindrical neck; octagonal sides with pronounced moldings above and below (the upper edge of the former acts as a ledge on which the lid sits); undercurve to base and slightly concave bottom. Lid: uneven vertical rim; plain cylindrical collar above, curving out to molding; sloping shoulder; flat top. On box, eight panels around sides decorated with four repeated designs: 1, a spoked circle below a triangular pediment; 2, a palmette below a rounded arch; 3, a circle with central dot within a lozenge; and 4, a lotus flower on a stem below a rounded arch; panels separated by vertical raised lines, decorated on the moldings above and below with raised knobs, perhaps representing thyrsi; on undercurve of base, a circular frieze of overlapping leaves; on bottom, four concentric raised circles with a dot at the center. On lid, eight outward-facing palmettes on shoulder; three concentric raised circles on top with a dot at the center. Box intact but lid broken and repaired with one chip in rim and other small holes around molding above collar; both box and lid largely covered with milky white weathering and iridescence. Box mold comprises four vertical panels for the sides and a saucer-shaped section for the base of the box; lid mold comprises a top segment and three side sections.